McFarlane Halo 4 Toy Review: Master Chief

This Master Chief is from the Target 4-pack. It’s
“cleaner” than the one I got from the first wave as well as the one I got from the Cryo Tube set. By cleaner I mean not so much weathering. I like it with not so much weathering, so this was VERY welcomed, even though it’s the third Halo 4 MC I now own.

It’s a superb figure. Sculpt is top notch, paint app is fantastic (as already touched upon), and articulation is great. I’m trying something new with this review by adding site points to show where the articulation is and what kind. So here’s the pic:

The new armor has really grown on me, so I’m happy to have a few Master Chiefs.

As the iconic hero of Halo, this is a must buy, IMO.

I give this a 9.5 out of 10 medals. Just some slight tweaks would have made this a 10. As I’ve said before though, rarely do things get 10s form me as I always see room for improvement.

This is a STRONG figure though, don’t pass it up! And since it comes in the 4-pack either from Target or Toys R Us, you can save a little bit on it as well as get a Crawler, Watcher, and Spartan Soldier. Definitely worth the purchase!

-Sal

McFarlane Halo 4 Toy Review: Spartan Soldier

Here we have the Spartan Solider. It comes in three different colors depending on where you buy it from. Here I show the blue and purple versions.

You can find the blue at most large retailers as that is the mass produced/distributed version. The purple version is exclusive to Target’s 4-pack and there is an Orange version which is Toys R Us’s exclusive, also in a 4-pack. The figures in the 4-pack are the same. Master Chief, Watcher, Crawler, and Spartan Solider. Only the color of the Soldier is different.

The rich color of these figures denotes a single player version. The blue is not the “team” blue color as that is much more pale in comparison.

Articulation for this figure is fantastic:
Ball jointed head
Ball jointed shoulders
Ball jointed elbows
Limited ball joint chest
Double swivel hands
Swivel hips
Ball jointed knees
Ball jointed ankles

So it’s VERY poseable. The sculpt is really good, though my blue version seems to have something wrong with it’s chest pouches. They are not centered and sit slightly angled. The paint app on the purple figure is actually bad. No doubt an issue with the manufacturing plant in China. It really sucks that China won’t allow foreigners to supervise their plants. Otherwise, we wouldn’t run into issues like this, or at least as often.

On the whole the figure is great. It comes with a Battle rifle on the single card. In the 4-pack there is an Assault Rifle and a Battle Rifle, so you can choose which to arm your spartan with or give it both. (Though that would leave Master Chief weaponless…

I do hope this figure gets remade as Spartan Paul Demarco, squad leader for Majestic Squad (with BOTH the human and helmeted head please…don’t make two separate figures). That pisses off most collectors.

So how does this figure rate?

I give it a 7 out of 10 medals. It’s good not great. Though I think I fault this mostly on the reasoning that I’m not much a fan of this particular armor set. Certainly if you like the armor, get it. If you’re the type who wants one of every spartan, then you can’t pass this up. If you’re in the Red Vs Blue camp, meaning you want every red and blue fig, then at least get the blue spartan.

I promised myself before Halo4 came out that I was only going to collect Campaign figures. Well, we see how long that lasted, LOL.

 

McFarlane Halo 4 Toy Review: Watcher

The Watcher is another new enemy from Halo 4. In the game it’s small and annoying like flying bugs, which is much what it is like. The little face on the character is eerie. The sculpt of the toy matches that quite well, in a good way of course. Read on fellow Halo fans to see what I think about the Watcher figure from McFarlane Toys.

The sculpt is amazing as always. Would you expect less from McFarlane? The figure is a bit small and there isn’t much articulation to speak of, but that’s not really something important with this figure…except for it’s ring wings. This version of the Watcher has just one solid ring that sticks out from the back. In the game they are deployed to the sides almost all of the time. I researched this a bit and found that the way the toy looks is much as it was in the concept stages of the game. So it’s likely given that toys take 9 months or more to make from concept to shipping that this is what McFarlane had to work with.I can’t knock them for this version of the Watcher.

I DO hope though that they come out with a version that has deployed wings. Fully poseable so that you can have them out to the side or position so they are swept back behind the figure. If you look at the pic above in the top right section, you’ll see where there is already a “ball” near the middle back of the figure. This could easily house the two wings. So here’s hoping we get another more game accurate version of the Watcher down the road.

The plastic stand that this figure comes with is a little disappointing as you can’t really hide it. But then if you look at the figure itself, it would be kind of hard to make a stand like this and be able to hide it. That’s why I hope when/if the figure is revisited, McFarlane will have a simple metal rod/stand like the ones that came with the Guilty Spark figure from an earlier release. That would be sturdy enough and able to give the Watcher more a look of being in flight.

So final thoughts.

This is a one-purchase for me until/if it gets redone with poseable wings. It IS a great sculpt so I do recommend getting the figure. It’s not high on the action part of action figure, but given what this figure does, I’m fine with it.

I give this 7.5 out of 10 medals.

McFarlane Halo 4 Toy Review: Crawler

The Crawler is one of the new enemy types found in Halo 4. I’ve given it the nickname of “Didact Dog.” I love the design of this character from the game. So I was excited to see it in toy form. Read on to see if that excitement continued!

This figure is fantastic. The sculpt is ridiculously good. The articulation is hidden well, except possibly for the mouth, though that is to be understood if you want that kind of articulation. (And I certainly do!)

The Crawler has the following points of articulation:

Head-Ball Joint
Jaws-Swivel
Shoulders- front are swivel, back are DOUBLE-ball joints!
Knees-No front knee articulation, back have limited swivel joints
Ankles-swivel

As you can see from the pics above the figure has a fair good amount of articulation. I’m VERY happy with the outcome of the toy and can’t wait for the other two versions of the Crawler, especially the “Prime” or Alpha Crawler. The hardlight spikes coming out of this figure will look SICK! (And I mean that in a good way)

So should you get this? I say hell yeah! Even without accessories, the sculpt and poseability totally make up for that. Knowing that we’re likely to see the other two variations makes me happy and wanting more!

This figure can be found in the slender Gamestop packaging, the normal large card at big retailers as well as in both the Target and Toys R Us 4-pack boxed set.

If I could get more of this figure I would….darn being strapped for cash.  🙁  It’s an army builder for sure.

I give it 9.5 out of 10 medals.

McFarlane Halo 4 Toy Review: Cortana

Ah the wonderous AI of Halo. Cortana is a great character. McFarlane Toys has again brought her to life, so to speak, with another action figure. Here is a compilation pic and a review of the toy.

Okay, first I’ll state that I got mine from Gamestop, that’s why it’s in the slender packaging. I’m not sure about the included Master Chief micro ops figure being included with the larger card, so check that.

I think it is very cool that we get that micro Chief. It’s a little funny too as normally Chief is the big fig while Cortana is mini (well in the games anyway).

Now to the accessories given. The screen with hand (permanently attached) is a very nice add-on. The issue I had though was that when I tried to take Cortana’s hand off from the figure to replace it with the screen/hand, it wouldn’t come off easily. So, rather than break the figure, I opted to leave it as is. That’s a bit disappointing though as I REALLY wanted to display her with the screen.

As well you get this large almost half spherical base, which is the top of the plinth she stands above in the game. Looks like it could have been ready for electronics like the Halo 3 version. I guess McFarlane took that out. Shame too as it would have helped.

However, given that this version of Cortana is solid instead of translucent like the Halo 3 version. So having lighting wouldn’t have mattered so much. The figure comes with limited articulation. Normally I would say the more articulation the better. In this case though, I would actually have preferred less. Since she can’t really sit or be posed any other way that makes sense or looks good, there really wasn’t much reason to have hip joints. Her head is in a downward looking pose and can’t be positioned upward. Darn…

With such a classic and iconic character of Halo, I was hoping for a little better here. While the paint apps are good, the fact that I can’t switch out hands for fear of breaking the fig, as well as not being able to pose her more dynamically, especially with her head being able to look up (as if to look at Master Chief) this figure is lacking.

I do appreciate the micro Chief and it will look great in my growing collection of McFarlane Micro Ops, which I hope continues to be produced. I wants my Scorpion and Pelican! LOL (and Mantis too please)

Overall this figure looks fine if you keep her in the static pose it’s meant for. That means though that there isn’t much action, in this action figure.

Thankfully though, she doesn’t require much “action” posing.

So, final thoughts…

Sculpt is great as always.
Accessories make sense and look great (though I wish I could switch out the for the screen hand)
Worth the purchase? Depends. I’d love to say yes without question, but I’m just hesitant to do that here. If you love the character then absolutely yes. If you’re looking for something very poseable, then no. Where am I specifically? I’m on the yes side with some slight reservations.

Since I know that I’ll likely jut be displaying her as a statue, she’ll do just fine. Just bummed about that screen hand…

I give it 7 out of 10 medals.

-Sal

McFarlane “The Package” 3-pack from Halo Legends

Coming soon, this set sees Master Chief, Fred and Kelly in action. The Master Chief is the same as we’ve had on the single card. The Kelly and Fred Spartans are new/partially new. Some of Fred’s armor is reused, but it does have the cool metallic blue paint and that awesome helmet. Kelly looks to be mostly new and of course comes in white with a new helmet.

This will be one set I’ll be sure to pick up when I see it! If you loved the Halo Legends episode this set was based from, then I highly recommend you getting it too.

-Sal

I was a featured guest on Dust and Echoes Podcast, take a listen.

DAE: Episode 27

I’m about halfway through. We talk about Forward Unto Dawn, the reviews and graphic novels I do for those episodes, Halo 4, Halo toys and a bit more.

I always enjoy doing podcasts. Quite like a talk show, but much more casual.

Please hop on over to their site at the link above and them come on back and let me know what you thought of it. Replies are always welcome!

-Sal

HaloFanForLife Forward Unto Dawn contest…

Okay folks, I’ve got an easy contest in the works. Stay tuned later for the specifics of the contest.

You MUST be a registered subscriber of the BLOG (not Twitter or Facebook) to win.

The prize will be a Halo McFarlane Master Chief (as seen in Forward Unto Dawn)

Here’s a pic from the McFarlane site:

Yes, I know it says from “The Package” which was an episode in the Halo Legends cartoon. However, it is the same armor as seen in Forward Unto Dawn.

Shipping will be free to those in the lower 48 states. If the winner is outside of this area, the will need to pay for shipping. (Sorry folks, I’m a bit crunched so I need to ask that of you) If the winner chooses not accept the prize on that condition, then I may award the prize to the second person who answers the contest question correct. You must be 18 or older to enter.

Again, look for the contest question later today…

-Sal (HFFL)

McFarlane Halo Master Chief Vs. Hunter resin statue (limited to 500)!

Forward-Unto-Dawn-Resin-Statue.html

Okay folks, want to own what is surely to become a holy grail of Halo collecting? This resin statue is up for sale at the link above for $225. You won’t get charged right now for it. (But will about a week before shipping which should be around the first week of December)

Only 500 total will be made. So this is VERY limited.

This isn’t plastic. It’s SOLID. The resin statue is a whopping 14lbs. Shipping is free. (Thank goodness as a 14lbs anything would cost a lot in shipping-I guess they took that into account when pricing the statue.)

If you do get it, shoot some pics my way, PLEASE. I’ll feature them on the blog. I unfortunately won’t be able to afford this beauty. Super SADFACE… 🙁

-Sal (HFFL)

NEW HALO 4: FORWARD UNTO DAWN LIMITED-EDITION STATUE

Text from Spawn.com:

NEW HALO 4: FORWARD UNTO DAWN LIMITED-EDITION STATUE
Statue Reveal & Pre-order On November 2nd
October 30, 2012
Copyright 2012 TMP International, Inc

McFarlane Toys has teamed up with Microsoft Studios and 343 Industries to bring you a new iconic collectable from the Halo universe.

Leading up to the highly anticipated release of Halo 4, Microsoft created the live-action digital series, Halo 4: Forward Unto Dawn. This online epic live-action digital series delivers an exciting story of heroism and sacrifice taking fans back to the beginning of the Human-Covenant War, leading into the events of Halo 4, the biggest entertainment event of 2012.

To commemorate this riveting action story, the McFarlane Toys Collectors Club is offering the first-ever Halo resin statue exclusively on the McFarlane Toys online store. This highly detailed, hand-painted, cold-cast resin statue depicts a pivotal scene from Halo 4: Forward Unto Dawn that is a MUST have for Halo fans.

The statue will be revealed by Todd McFarlane, McFarlane Toys’ creator, during the final episode of “Halo After Dawn,” airing on Machinima Prime and Halo Waypoint this Friday, November 2 at 10 am PST.

The limited-edition Halo 4: Forward Unto Dawn statue stands more than 14-inches tall on a base spanning 13” wide by 7” deep. Only 500 pieces have been produced and each statue and its box are sequentially numbered. As an added bonus, each statue will include a Certificate of Authenticity hand-signed by McFarlane.

The Statue retails at $225 with FREE Shipping (Only available in US and Canada). Preordering will begin at 10:15 am PST on Friday, November 2nd.

The Halo 4: Forward Unto Dawn statue is planned to ship December 2012. Customers will not be charged until the order is ready to ship.

Don’t miss your chance to own a piece of Halo history!

End Copy/paste

Thanks to my buds VaderRx and Big_Matt for posting the info.