Toy Review: McFarlane Halo 4 Didact action figure

McF Toys logo

By far this is my favorite from the series. In fact favorite of all of McFarlane’s Halo 4 figures. Might even be my favorite of ALL McFarlane’s Halo figs, regardless of game association.

This figure is amazing by all accounts.

First let’s start with some in-game references. (Click pics to make BIGGER)

Didact max

McF Didact boxHere is the box art from all sides. It shows off the figure prominently. The back shows the different figures from this series. A little bit of info on the Didact is shown as well on one of the sides.

Speaking of, if you want more info on the Didact, go here.

McF Didact UN-box
Remove the box and this is what you see. The background image is that of Requiem opening.

McF Didact code sheetHere is the code sheet that gives you BOTH the Refractive Suppressor and Refractive Venator Armor Skin.

McF Didact ORTHOThe Didact in orthogonal views. Impressive huh?

What follows are some more detailed shots.

Starting with the head, neck armor and shoulders.McF Didact Detail Head-Shoulders

McF Didact Detail Upper TorsoAbove shows the upper torso. McFarlane Toys really took care to sculpt the hell out of this as well as give it an immaculate paint job. This is just CRAZY good with detail!!!

McF Didact Detail Waist-HipsThe mid-section and upper thighs are no slouch in detail either. Just look at the individual armor ribbing in the upper thighs on the front, as well as the orange/yellow highlights all over.

McF Didact Detail Lower Legs-FeetThe lower legs and feet also have some AMAZING detail. From the pincer like toes to the rear leg prongs, the figure just doesn’t stop with the detail!

Didact Close-up_sm

Next up are shots of the figure’s head and helmet:

McF Didact Detail HeadJust look at the sculpt and paint detail here! The underside shows how the head pops on.

McF Didact Detail HelmetThe helmet is just as great with detail.

McF Didact HelmetedHere’s a shot showing the helmeted head attached to the figure. BADASS!

Didact end mission_smMcF Didact ArticulationThe articulation of this figure FAR surpasses that of any McFarlane Halo figure to date. Each of the inner 4 fingers has it’s OWN hinge joint as shown above. You can close his fists, make one of the fingers point or go all open as shown.

Finally for scale, here are ALL of McFarlane’s Halo 4 series 2 figures.

McF Didact and series 2 figsAs you can see the Didact figure just dwarfs all the rest.

If you do not collect any other figure from halo, THIS one is a must buy! The only minor issue is that the head paint is a bit too dark. Still, that isn’t enough to detract from the overall figure for me.

It retails for between $30-33 depending on where you buy it from.

To say McFarlane Toys knocked this one out of the park is an understatement. I give this an 11 out of 10…yes you read that right!

-Sal

Toy Review: McFarlane Halo 4 series 2 Storm Jackal

McF Toys logo

Other than the Didact, this figure is my favorite in this series.

I give you the Storm Jackal.

McF H4s2 Storm Jackal packageThis figure comes with the ‘Engage’ Carbine skin. Once again the slender packaging is nice and really highlights the figure without any wasted space.

McF H4s2 Storm Jackal ORTHOAs you can see in the above pic, the Jackal is still just as lithe as it’s always been, even with the redesign of the head and armor. An amazing amount of detail has been poured into this figure.

McF H4s2 Storm Jackal CarbineThe Carbine included is a vibrant metallic purple as you see above. Additional blue paint adds to the detail of the weapon.

McF H4s2 Storm Jackal Head-Neck detailHere you can see the amazing amount of detail put into the skin of the Jackal. Not only do the arms/shoulders show a ton of scaly bumps, but the neck is just littered with them which adds to the authenticity of the figure. Add the behind the jaw pouches and added mouth detail and it almost looks like it’s alive.

McF H4s2 Storm Jackal Back detail

Above you can see the back fins have been well defined and even have lines sculpted in to show varying parts of armor. The two-toned look of the armor is well done. No complaints at all on the paint application here!

McF H4s2 Storm Jackal Leg-foot detailThe leg detailing is great and just look at those toes!

McF H4s2 Storm Jackal StandThis is the only one of the figures in this wave to include a figure stand. I DO wish they all came with one, regardless of character. It can’t be expensive to add in and would really help with posing the figures.

McF H4s2 Storm Jackal Articulation

Finally, here you can see the figure’s articulation. Again amazing as all the rest are in this series. However, I think this one just LOOKS better than the rest for that articulation. I had to think why and figured it out. It’s not encumbered by as much armor as the rest in this series. So in that respect it is rewarded with greater range of motion in it’s articulation.

There are two minor things I’d have liked to see done better. Unless my eyes deceive me, the blue paint on the armor should be darker. That’s one I can easily over look though.

The other is the think spaghetti-like tooth bristles of it’s head and elbow ‘hair’. I’d have liked to have seen these done thinner and end more in a point than a rounded end. Again though, these do not detract significantly from the figure for me.

I absolutely recommend this figure. Even if you’re not a fan of the redesign by 343, which isn’t McFarlane’s fault, the figure itself is superb as a toy.

This gets a 9.75 out of 10 from me. Just the hair bristles…

Price for this ranges between $13-16 depending on where you get it from.

-Sal

Toy Review: McFarlane Halo 4 series 2 Elite Ranger

McF Toys logo

The following is one of my favorite from the McFarlane Halo 4 series 2 wave of action figures.

It’s the Elite Ranger!

McF H4s2 Elite Ranger packageAs with the other figures in this series, the Elite Ranger comes in a nice compact ‘sleeve’ package. This one however is a little bigger from to back as the Elite is bulkier than the Spartans and Jackal from this series.

Note the ‘Chill’ weapon skin for your storm rifle. This series seems to have a pattern of blues and purples for it’s weapons skins. I think this skin looks great on the storm rifle.

McF H4s2 Elite Ranger ORTHOHere’s the elite in orthogonal views. Very sturdy figure. You do have to take a minute to position it right as the center of gravity for this figure is different from the spartan figures.

McF H4s2 Elite Ranger Beam RifleThe Beam rifle (and flipped) is just awesome. Detailing is great, sculpt is spot on, color choice is fantastic.

McF H4s2 Elite Ranger Arm-Back DetailAbove shows the detail of the Elite Ranger’s arm and back. A ton of detail here. The space suit it wears has these intricate patterns on it that McFarlane captured nicely.

The dorsal ‘fins’ are perfect. Note the jump jets attached to the arms, shoulders, top middle back as well as one on the butt. Additional detail as in the greens and yellow graphics really add to this figure.

McF H4s2 Elite Ranger Head-Neck DetailHere are some shots of the head and upper back. Again the detail is amazing. Squint and you may just be able to see the Elite’s eyes in the visor (near the bottom of it).

McF H4s2 Elite Ranger Leg DetailThe leg details are just as good as the rest of the figure’s details. Once again jump jets are prominent on the figure, here on it’s knees.

McF H4s2 Elite Ranger ArticulationThe articulation of this figure is on par with the spartans.

The Beam Rifle is a bit heavy and my figure’s wrist joint on it’s holding hand is loose. So I can’t pose mine with the weapon in one hand without it drooping. Good thing though that this is a two-handed weapon anyway.

The color for the Elite’s suite is excellent.

It’s a great figure and one I HIGHLY recommend if you like campaign figures. Hopefully now we can get the regular Storm Elite.

I give this a 10 out of 10!

The figure runs between $13-16 depending on where you get it from. It’s worth every penny, IMO.

-Sal

From Concept to Completion, color in Halo artwork.

Awhile back I used to post concept art of Halo. I haven’t done that for awhile. I found some of the files I had scanned in, that I hadn’t use, with the intention of continuing on with that series of articles.

Here is the first of the new batch of concept line art that I’m passing on to you, to color in.

It’s a Brute Chieftan.

Brute Chieftan Concept C FIN originalYour assignment should you accept it, is to download this and color it in. Use whatever means you want to color it. Nothing vulgar though…

When done, send it back to me in digital format to my e-mail: sal@halofanforlife.com. I’ll pick a winner and send you something.

You have until Sunday Oct 6, 11:59 pm EST time to submit your colored in Brute Chieftan. Same file size please.

Here’s what I came up with:

Brute Chieftan Concept C FIN

Note the blood spattering on the light grey fur. As well, I chose purple for the feathers to denote some exotic animal the Brute had hunted and killed.

-Sal

 

 

Contest for Halo 4 “Engage” Carbine skin

Okay, instead of the normal trivia questions which are usually EASY with just a quick look-up on Google, I’m going to make this a bit more interactive.

I want to see your HAND DRAWN Carbines. NO PHOTOSHOP.

Here is the computer rendered file from 343. Use for reference if you’d like.Halo 4 Carbine

You have until Sunday 11:59pm (EST) to send me your drawing. You must be a registered member of the blog to enter. It’s free to register, so send me an e-mail at sal@ halofanforlife.com if you want to sign up for the blog. Just give me your desired user name and a password you want to use. You can include your drawing in that e-mail as well. Nothing over 1MB please.

If you’re already registered, send me your drawing via e-mail as well and be certain that you include your screen name here on the blog. (I”ll be checking those)

I’ll pick one for the entries and send you the code.

Drawings may be in pen, pencil, marker, crayon. Again NO computer rendered files. If I have to guess if it’s computer rendered or not, it will likely be disqualified without notice.

So let’s see those Carbines folks!!!

-Sal

Custom Covenant Corvette from Mega Bloks

MB grey logo

Form time to time I try my hand at custom Halo stuff. Usually this comes in the form of Halo Mega Bloks. Today is no different.

I took it upon myself to see if I could make a Covenant ship from a SMALL set. That set is the Halo Mega Bloks Spectre.

Box Front

Box Front

Knowing that it would be a tough challenge to build something accurate from so few pieces, I started out on my task.

First things first, I found several good pics for reference, the following being the best of them:

Covie Corvette ORTHOMind you I already knew that I wouldn’t have the right color, given the set I had chosen, but I wasn’t concerned with that so much.

MC Custom Covie CorvetteSo here is what I came up with. Yes, I realize some things are a little out of scale, but again this is a one-set challenge. Given the limited parts and shape of them, I’d say it came out pretty good.

MC Custom Covie Corvette top viewsTop views from the front and back.

MC Custom Covie Corvette 3-4 views

And finally some 3/4 views.

Again, given the small amount of pieces and limited shapes, I’m pretty happy with the outcome. However, I DO wish MEGA Bloks would create some large Covenant ship sets for us. I’d LOVE to see what they would come up with.

So tell me, do you like this custom? (Again be kind, considering the piece count and type)

-Sal

Halo Toy Review: McFarlane Halo 4 series 2 Spartan CIO (purple)

McF Toys logo

 

Here’s another of the multiplayer spartan figures form this wave.

McF H4s2 CIO purple packageSlender packaging that shows the figure off nicely. As you can see it also includes an armor code. This for the ‘Ruin’ skin. This skin is actually similar to the ‘Toxic’ skin that comes with the Scout figure. Again, you need not use the colors shown. These are just the ones that are chosen to highlight the skin.

McF H4s2 CIO purple ORTHOThe sculpt is the same as that of the Walgreen’s exclusive CIO from this wave. The difference is in the paint. This one comes with a vibrant purple color.

As with the Scout, my only complaint here is that it didn’t come as either the team red or blue color instead. Given how scarce the series are between one another, I’m not sure if we’ll see every iteration of spartan armor from Halo 4. So in the meantime, I’d prefer them as either red or blue teams.

McF H4s2 CIO purple DMRThe DMR is nicely detailed and of course the peg is removable.

McF H4s2 CIO purple ArticulationAs always, McFarlane’s Halo figures have fantastic Articulation, as seen above.

The sculpt is fantastic, as expected.

Depending on your like of this color, you may want it or not. It’s a nice color, but again, not knowing if we’ll get every armor permutation, I’d prefer red or blue instead.

I give this fig a 8.5 of 10. It would have scored higher for me if it would have had a ‘skin’ as the Walgreen’s exclusive did, or at least have been red or blue.

-Sal

Halo Toy Review: McFarlane Halo 4 series 2 Spartan Scout

McF Toys logo

This long awaited series is now out and can be found at several major retailers, most notably Toys R Us and Walgreens.

This review details the Orange Spartan Scout figure from series 2 of the Halo 4 action figures by McFarlane Toys.

McF H4s2 Scout packageI’m glad to see that all of the figs come in this slender packaging. No waster space here and less impact on the environment. Kudos to McFarlane for that!

As you can see in the pic this figure comes with an armor code for the Scout, titled ‘Toxic’. It’s a neat skin. You do not have to use the colors as shown and thus can create a different look with the skin by using different colors.

McF H4s2 Scout ORTHOThis is one of the few Spartans McFarlane has done that deviates from the normal ‘Legendary’ visor. That is to say copper color. Instead it has a silver color. No doubt this choice was made due to the already prevalent orange color of the spartan itself.

McF H4s2 Scout sticky detIt comes with a Sticky Detonator. The peg attached is removable. If you don’t want to pose the figure holding the weapon, you can easily stow it on the hole on the side of the leg.

McF H4s2 Scout detailThe above shots show some of the great details on this figure. Not only is the sculpt excellent, but note the ‘UNSC’ on the chest piece as well as the wing/sword symbol. Both nice extra touches of detail. The armored glove as you can see shows paint detailing nicely on each finger.

McF H4s2 Scout ArticulationFinally we have the articulation for this figure which is standard for most of McFarlane’s Halo Spartans. That is to say a LOT!

This is a great figure. My only complaint is that I’d have preferred this to be Commander Palmer instead of a non-descript Orange colored Spartan. Barring that, make it either team red or blue.

Still, it works as a Grifball Spartan and again, the detailed sculpt and extra paint apps make this a quality figure.

I give this a 9 of 10. Again, preferring this had been Palmer instead.

-Sal

The Halo Bulletin 9.2.13

halobulletinheader_10-2-13

 

The first article of this week’s bulletin starts off with news of the Game of the Year edition of Halo 4. I’ve covered this extensively already. However, if you haven’t seen the trailer for this, take a gander:

Next up is the Matchmaking Playlist update. Several things to note here regarding additional maps/gametypes being included in Snipers, and Team Doubles.

Oddball will replace King of the Hill for the rotational playlist starting Oct 14.

The Halo 4 Forge Ricochet Contest is still going on through Oct 8.

Next up is a written tutorial of sorts on how to make Race from Multi team Ricochet. (Too bad Race isn’t just native to Halo 4 instead of having to jump through hoops to make it…). The following text is taken directly from the bulletin:

Ricochet to Race: How to create Race from Multi-Team Ricochet 

While Race will be coming to Halo 4 Matchmaking in December (continue reading for details), we know that Race custom game types have been quite popular amongst the custom game community, so we’re happy to let you know that the designers over at Certain Affinity have detailed the step-by-step instructions to make the Race game type out of Multi-Team Ricochet. First, you’ll want to download the “Ricochet Multi-Team” game type from the “HaloWaypoint” File Share. Next, if you need a crash course on Ricochet game type labels, head here for all the info. Once you’re ready to get started, follow the below instructions:

1) Label a vehicle or vehicles as rico_forgeball to turn them into ‘balls’.

2) Use ForgeZones as the checkpoints for the race, and set up hill_marker objectives and label them rico_forgezone. These are set up so that they disappear and reappear in order that you hit them. Next, number the spawn sequence to set the order. You can award score for hitting each checkpoint, or only for particular ones. See the documentation for additional info.

3) Who is awarded points depends upon the team of the ball and the team of the ForgeZone. If the team of either of these is set, and so is the user data, then whenever the ‘ball’ enters any ForgeZone, the team of the ball will be awarded the points set on the ball, and the team of the zone will be awarded the points set on the zone. This means you have flexibility in how you set up the race.

Scenario 1: A neutral ball and then a series of ForgeZones set to teams.

The players could fight over who is driving the ‘ball’ and whoever is driving can aim for the checkpoints of their team color. The map can be forged so that the checkpoints are next to each other instead of in the same place, so that players avoid hitting the enemy’s checkpoints when they drive.

Scenario 2: Two team balls (vehicles), one for each team, or as many teams as you have on the map, with neutral ForgeZones.

Set the scoring points on the zones themselves to zero, and only use one set of zones. Set the scoring points on the balls appropriately for the teams. After everything is set up, it’s then a question of who is in the lead and hitting the checkpoints so that they disappear first (and getting the scoring points from their ball.)

Scenario 3: Team balls, and team ForgeZones in the same locations.

With this setup, players score when they hit their checkpoint, but the other team’s checkpoint is still available. Scoring points can be assigned to either the ForgeZones, the balls, or both. This can get a bit visually messy with all the different colored zones visible and in the same place, but is guaranteed good fun.

Up next is the Matchmaking Rotational playlist calendar which I just covered previous to this article.

The community gets a spotlight in the form of a remake of Countdown (the music to the vid is a bit annoying to me so I viewed it with sound off):

countdown_660

 

What follows is an interview with the map re-creator.

The map looks good but not exact to the original. I’d really love to see a Classic Map pack come to Halo 4. There would be MANY Halo 3 maps. However, Reach had a few I’d like to see come back. Countdown being one of them.

Finally we have this week’s screenshot spotlight that focuses on the color ORANGE. Though this is a bit early for Halloweeen. There are a few here I like. Especially “Refracitve FOTUS”.

For the FULL bulletin, go on over to Waypoint’s post too see/read all.

-Sal

Halo 4 Matchmaking Rotational Playlist Calendar

Waypoint released these images yesterday showing the rotational playlists for the next few months:

october_mmcalendar2_660november2_mmcalendar_660decemberjanuary_mmcalendar_660So get your games in and commendations done while you can. Otherwise, it’s going to be MONTHS before you get the next opportunity.

I’m really dismayed by the rotational playlist. If certain ones didn’t have commendations attached to them, that would be fine. Otherwise, it’s almost an exercise in futility trying to complete certain commendations. Case in point, the current one, King of the Hill, isn’t populated much and you can nearly forget about trying to find an evenly matched game late at night (EST U.S. time).

I still say that 343 needs to have a better playlist. Team Objective would include some of these in the rotational playlists. Dominion could easily move to BTB. Multi-team should NEVER go away. Include Rocket Race into that playlist.

As for community Ricochet maps, they can be tested in the current Ricochet playlist. That would leave us just with regular Race out of all of these. That could have it’s own playlist for awhile to gauge it’s popularity.

I’m about 32 King of the HIll wins away from Mastering that. I really hope I can get them done in these two weeks as I do NOT want to have to wait months for it to come back.

Source Link

-Sal